#65675 – Digital microscope camera SIGETA M3CMOS 10000 10Mp USB3.0

10 megapixel USB camera with Aptina sensor, good value for money and resolution. It works with a microscope and a computer with ToupView capture software installed. It is connected to a computer via a super-fast USB 3.0 interface, broadcasting in a real time the images generated by the microscope to the PC monitor. It enables high-speed capturing and transferring of images.

M3CMOS 10000 10Mp camera eyepieces consist of two parts: the actual "body" of the camera with a C-Mount thread and an optical block - an adapter for microscopy. With one side the adapter is screwed into the camera thread and with the other side it is attached to the microscope's optical port. If the seating diameter of the "electronic eyepiece" is smaller than that of the eyepiece tube, a ring adapter from the kit is installed between them.

The 1/2.3" sensor contains 10 millions of 1.55 x 1.55 μm light-sensitive cells covered with a Bayer mosaic and an infrared filter cutting off long wavelengths (above 650 nm). Thanks to the Ultra-Fine Color control system, images captured with the camera display high contrast and natural colour reproduction.

The SIGETA M3CMOS 10000 10MP USB microscope camera is operated via the versatile ToupView software with image measurement and editing functions. Along with the software disk and the connection cable in the package you will also find a calibration ruler and two adapter rings - 23.2/30 mm and 23.2/30.5 mm.

The housing is constructed of zinc-alloyed aluminum and has no bulges or small removable parts. Even with "aggressive" laboratory use, the model will withstand the test of time.

Important parameters

• - 10 megapixel Aptina CMOS sensor
• - C-Mount connection
• - Rugged metal casing
• - USB 3.0 interface with data transfer rates of up to 5 Gbps
• - Embedded Ultra-Fine Color Engine
• - Records still images, captures video
• - Works with ToupView frame capture software